← To overview

Magnetic beer tree

Where do you put all the bottle caps after a cozy evening with friends or family? The perfect solution: a magnetic beer tree!

Today we would like to introduce you to three very creative and practical beer trees that our customers have created with the help of our magnets.

Materials and tools used for example 1:

A suitable stick/branch with attractive forks
A wooden board
Sawdust
A screw
Screwdriver
Saw
Hot glue
Wood glue
Magnetic sphere / Sphere magnet Ø 19.0 mm chrome N38 - holds 5.7 kg (amount as needed and depending on the size of the branch)

This is how example 1 was created:

Saw the branch and all other wooden parts to the correct size/shape and then screw them onto the wooden board.
Spread glue generously over the wooden board to decorate it with sawdust and other decorations.

Use hot glue to attach the magnets to the branch as desired.

Magnetic Beer Tree Example 1

Crown Caps Collection Bierbaum

General view of magnetic beer tree

Decorated beer tree

Wooden board for beer tree

Saw a small dead tree or branched branch to size.
Using a suitable wood drill bit, in this case a 10mm, drill three holes in the upper branches with a depth of approximately 2 cm.
Glue.
3 x rod magnet Ø 10.0 x 50.0 mm N40 nickel - holds 6.5 kg - Press these into the pre-drilled holes.
Finally, screw on a suitable stand of your choice as a base.

Processing branch / tree

Drilling work on branch/tree

Base for Bierbaum copy 2

Branch used for beer tree

View of the base from below

Finished Bierbaum, Example 2

Finished beer tree with bottle cap

A metal screw was screwed into the birch handle so that the magnetic sphere / Sphere magnet Ø 30.0 mm nickel N40 - holds 12.9 kg by itself.
The stem is attached to a wooden disc and the "bottle cap holder" is ready.

Finished Beer tree specimen 3