Thousands of products in stock
Magnetic Beer Tree - DIY
What you may not yet know is the ingenious replica from one of our customers: Magnetic Beer Tree - DIY
Magnetic Beer Tree - DIY
A branch from a small, dead tree was used. Make sure that the forked branch, or whichever part of the tree you want to use, stands upright on its own. This makes it more stable in the end!
Then, use a saw to cut the branch to the desired length – the only limits are your imagination. The more branches, the more rustic the result will look. Just make sure the ends aren't too thin so that the magnets can still be inserted. A 10 mm drill bit is used here.
The holes are drilled approximately 2 cm deep. For each branch, a rod magnet Ø 10.0 x 50.0 mm N40 nickel - holds 6.5 kg, is inserted into the holes and secured with adhesive (e.g., a hot glue gun). The appropriate stand can then be screwed on from below. Once it's securely mounted, the tree can grow!
Related products
| To 2 pieces |
€6.15*
|
|---|---|
| From 3 pieces |
€5.35*
|
| From 10 pieces |
€4.67*
|
| From 20 pieces |
€4.31*
|
| From 40 pieces |
€4.06*
|
| From 240 pieces | Request price! |