Magnetic attachment of a cable guide

A magnetic cable guide attachment is today's topic.

Magnetic attachment of a cable guide

Dear Team,

I was delighted to see your "competition" enclosed in my package, where I can tell people about my intended use in exchange for a voucher. My intended use is as follows:

Attaching a cable guide with protective conduit and pipe clamps to the meter box itself!

Materials used:

• 3 x Neodymium pot magnet Ø 32.0 x 7.0 mm, internal thread M6, holds 26 kg
• M6 x 16 flat head screws
• OBO-Bettermann pipe clamp for 32 mm pipe
• Protective conduit 32 mm diameter
• 5 x 16 mm² cable flex

Objective:

• Flexible fastening of a conduit guide to the metal housing of the meter cabinet without drilling dowel holes in confined spaces
• Simplified introduction of the cable into the grid cable support under the ceiling, which would be difficult with such a thick cable if the cable were routed on the wall.

What to consider:

• Actually, not much; the M6 ​​screws shouldn't be too long, of course; it depends on the cable clamp used.
• The rest is self-explanatory and very easy.