5 minutes epoxy adhesive fast curing 2-component adhesive

The 5 minute epoxy adhesive is a 2-component adhesive and is ideal for securely gluing magnets!

 

It is suitable for visually demanding gluing and glues a variety of materials. Such as metal, ferrite, marble, ceramic, stone, wood, concrete and plastics with each other. The adhesive can also be overpainted and is also water and shockproof.

 

Important instructions:

The epoxy adhesive consists of two components: epoxy resin and hardener.
These are stored separately from each other. Only when the adhesive is to be used are the two substances mixed together.

Handling is very easy with the handy double syringe (twin syringe). Mixing takes place automatically when the syringe is used. Please note: the mixing ratio should be 1: 1 for larger quantities.

 

Application:

In order to achieve an optimal result, the surface should be clean and free of grease!

First, break off the tip. Now put the attached syringe on top and the mixing takes place automatically by squeezing the tube. Alternatively, you can also do the mixing yourself. To do this, squeeze out the glue and mix the two substances with the stick from the piston or an other object for about a minute. Now apply the glue to the parts you want to glue and bring them together. Give the glue some time to harden. This requires a room temperature of around 20 ° C. The hand firmness is reached after about 12 minutes. After about 30 minutes, the adhesive is ready for further treatment. As soon as 24 hours have passed, it is fully hardened. Please note, however, that the curing times depend on the room temperature!

After use, please close the seal of the adhesive with the clasp in the stamp.

 

Notes to purchase:

Each adhesive is supplied with a mixing nozzle. You can also order the replacement nozzle in our shop: Mixing nozzle for epoxy adhesive with bayonet

 

Technical specifications:

Processing time: 5 minutes

Hand strength: approx. 5-10 minutes

Color: clear, colorless

Viscosity: 25 Pa-s

Operating temperature: up to 120 degrees

Contents: 25 ml

 

Safety instructions:

R22: Harmful if swallowed.

R36 / 38: Irritating to eyes and skin.

R43 May cause sensitization by skin contact.

R51 / 53: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

S26: In case of contact with eyes, rinse immediately with water and consult a doctor.

S28.2: In case of contact with skin wash off immediately with soap and water.

S37 / 39: Wear suitable protective gloves and safety glasses / face protection.

S60: This product and its container must be disposed of as hazardous waste.

S 61 Avoid release to the environment.

 

Follow the manufacturer's instructions.