silwy Wardrobe SPOTLIGHT with 3 hooks and metal rail, black
€69.95*
Available, delivery time: 1-3 working days
Product information "silwy Wardrobe SPOTLIGHT with 3 hooks and metal rail, black"
Universal wardrobe rail - can also be used as a key board, bathroom or kitchen rail
The magnetic hooks have to be combined with a metal counterpart. A metal strip is included in the set for this purpose. The force ratio between the magnetic hooks and the metal strip is perfectly balanced so that the hooks can be fixed by the rail on the one hand, but can also be easily removed from the rail on the other. The thick metal core inside the bar makes the pulling force particularly strong.
The metal rail is permanently attached using 3M adhesive tape. Please follow the installation instructions on the product page.
The combination of magnetic hook and metal rail can be loaded with up to 10 kg.
- No drilling or screws required
- Wardrobe can hold up to 10 kg
- Metal rail holds the stylish magnetic hooks in place
- Very strong pulling force due to high metal content
- Smart solution for travelling and at home
- For jackets, towels and bathrobes
Metal strip (incl.)
- Store dry and protected from the sun.
- For smooth, sealed surfaces.
- Use to store on the wall.
This product may be used
- vertically (wall).
This product is not allowed
- used upside down.
Product care and instructions
- Avoid contact with water (magnets).
- Beware of crushing hazard.
- Observe tensile force.
- The rail is permanently attached.
Dimensions
Hook: 3,2 x 4,1 x 4,1 cm (HxWxL)
Pad: 0,3 x 8,0 x 8,0 cm (HxWxL)
Rail: 0,3 x 5,0 x 25,0 cm (HxWxL)
Technical specifications
| Adhesive force: | 10 kg |
|---|---|
| Color: | Black |
| Weight: | 560 g |
The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
Login