Skip to main content Skip to search Skip to main navigation
check Thousands of products in stock
check No minimum order value
check No surcharge for small quantities
check Daily shipping
check Flexible payment options

Now available from us: The first magnetic tapes made of neodymium - open up new areas of application!

For many years the magnetic foils and tapes could only be made from ferrite material. Due to the increasing demand for even stronger foils, the neodymium magnetic foil was developed.
Neodymium-iron-boron is mostly used for the production of so-called super magnets. An enormous adhesive force can be achieved here in the smallest of spaces.

Our neodymium magnetic foils achieve a much higher adhesive force than normal magnetic foils. These foils can now be used in areas where the adhesive force achieved by the ferrite foils was not sufficient before.

These power neodymium tapes have an adhesive force of 415 g/cm²

For comparison: adhesive force of a normal magnet made of ferrite: 102 g/cm²

Advantages:
- elastic and flexible
- Can be cut to size with a craft knife or sturdy scissors

Width:  6,0 / 10,0 / 15,0 / 30,0 / 50,0 / 80,0 mm
Thickness: 1,5 mm
Roll of: 10 meters
Magnetization: isotropic
Magnetization quality: R6
Temperature range: - 40°C bis + 100°C
Adhesive force: 415 g/cm²
Adhesive: 3M 9448
Weight: 0,450 / 0,800 / 1,200 / 2,400 / 4,000 / 6,000 kg/Stück
Shore D hardness: > 30
Pole spacing: 5 mm

The technical data for this product can be found in our magnetic characteristics

Technical specifications

Lenght: 10 m
Width: 10 mm
Adhesive force: 415 g/cm²
Material: Neodymium
Magnetization quality: R6
Weight: 1,2 kg
Adhesive: 3M 9448A
EAN: 4250538422409
Manufacturer: magnets4you

Determination of the magnetic force

The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.

 
Please note the safety instructions for this product.