NEODYMIUM Power-Magnetic tape 10000 x 30 x 1.5 mm self-adhesive
Product number:
NMF-30x1.5x10000-sk
Now available from us: The first magnetic tapes made of neodymium - open up new areas of application!
For many years the magnetic foils and tapes could only be made from ferrite material. Due to the increasing demand for even stronger foils, the neodymium magnetic foil was developed.Neodymium-iron-boron is mostly used for the production of so-called super magnets. An enormous adhesive force can be achieved here in the smallest of spaces.
Our neodymium magnetic foils achieve a much higher adhesive force than normal magnetic foils. These foils can now be used in areas where the adhesive force achieved by the ferrite foils was not sufficient before.
These power neodymium tapes have an adhesive force of 415 g/cm²
For comparison: adhesive force of a normal magnet made of ferrite: 102 g/cm²
Advantages:
- elastic and flexible
- Can be cut to size with a craft knife or sturdy scissors
| Width: | 6,0 / 10,0 / 15,0 / 30,0 / 50,0 / 80,0 mm |
| Thickness: | 1,5 mm |
| Roll of: | 10 meters |
| Magnetization: | isotropic |
| Magnetization quality: | R6 |
| Temperature range: | - 40°C bis + 100°C |
| Adhesive force: | 415 g/cm² |
| Adhesive: | 3M 9448 |
| Weight: | 0,450 / 0,800 / 1,200 / 2,400 / 4,000 / 6,000 kg/Stück |
| Shore D hardness: | > 30 |
| Pole spacing: | 5 mm |
The technical data for this product can be found in our magnetic characteristics
Technical specifications
| Lenght: | 10 m |
|---|---|
| Width: | 10 mm |
| Adhesive force: | 415 g/cm² |
| Material: | Neodymium |
| Magnetization quality: | R6 |
| Weight: | 2,4 kg |
| Adhesive: | 3M 9448A |
EAN:
4250538422416
Manufacturer:
magnets4you
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
Please note the safety instructions for this product.