check Thousands of products in stock
check No minimum order value
check No surcharge for small quantities
check Daily shipping
check Flexible payment options
magnet-shop.com
€0.00*
Skip image gallery
Metallscheiben Ø 50 mm aus Nickel mit Loch und Senkung, neben 1-Euro-Münze als Größenvergleich.
Ringmagnet Ø 50x4,5x4 mm N35 Nickel mit Senkung, neben 1-Euro-Münze zum Größenvergleich.
Diagramm eines Neodym-Ringmagneten (Ø 50 x 4,5 x 4 mm, N35, Nickel), mit Senkung und Nord-Süd-Kennzeichnung.
Metallscheiben Ø 50 mm aus Nickel mit Loch und Senkung, neben 1-Euro-Münze als Größenvergleich.
Ringmagnet Ø 50x4,5x4 mm N35 Nickel mit Senkung, neben 1-Euro-Münze zum Größenvergleich.
Diagramm eines Neodym-Ringmagneten (Ø 50 x 4,5 x 4 mm, N35, Nickel), mit Senkung und Nord-Süd-Kennzeichnung.

Ring magnet Ø 50.0 x 4,5 x 4.0 mm N35 nickel with counterbore north

Product number: RMS-50x04x04-N-NP
There are still 1540 items in stock.
0,00 € *
0,00 € * / pieces
Volume discounts
To 2 pieces
€7.96*
From 3 pieces
€7.16*
From 10 pieces
€6.61*
From 20 pieces
€6.21*
From 40 pieces
€5.57*
From 180 pieces Request price!
  • Daily shipping and fast delivery
  • No minimum order value
  • Personal advice

This ring magnet Ø 50 mm made of neodymium with a 90 ° countersink can be screwed on with a countersunk screw.
The 4.5 mm hole is designed for a screw with a diameter of 4 mm.

This magnet has the north pole on the depression side.

Note: You cannot use two of these magnets in pairs, i.e. the magnets do not stick to one another with the countersunk side, but repel each other.
If this magnet should only stick to metal, the direction of magnetization / polarity is irrelevant.
 
Note: If too much force is applied, neodymium magnets can break. We recommend a maximum tightening torque of 2 Nm when screwing on this magnet.

Technical specifications

Diameter: 50 mm
Height H: 4 mm
Adhesive force: 14 kg
Material: Neodymium
Magnetization quality: N35
Maximum temperature: 80 °C
Coating: Nickel (Ni-Cu-Ni)
Magnetization direction: axial (parallel to height)
Inner diameter: 4,5 mm
Weight: 59 g
Tolerance: +/- 0,1 mm

Technical specifications for magnetization grade N35

Material Remanence Coercivity Energy product Maximum temperature
  Br bHc iHc (BxH)max  
  Gauss (G) Tesla (T) typ. kOe kA/m kOe kA/m MGOe kJ/m 3  
N35 11700-12100 1.17-1.21 10.8-11.5 860-915 ≥  12 ≥  955 33-35 263-279 ≤  80
EAN: 4250538423086
Manufacturer: magnets4you

The product conforms to the European RoHS Community legislation

The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.

Safety Notice

NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!

Determination of the magnetic force

The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.

 
Please note the safety instructions for this product.

Skip product gallery

Accessories

Runder Haftgrund aus Metall mit Senkbohrung, geeignet zum Anschrauben, neben einer 1-Euro-Münze zur Größenvergleich.
Metal disc Ø 50 mm with hole and countersink nickel
Product number: MS-50-N
View product details
There are still 4080 items in stock.
From 5 pieces
€0.76*
From 15 pieces
€0.68*
From 40 pieces
€0.63*
From 80 pieces
€0.60*
From 1000 pieces Request price!
0,00 € *
0,00 € * / pieces