Blockmagnet 42.1 x 5.7 x 14.4 mm N45 nickel - holds 12 kg

Preview: Blockmagnet 42.1 x 5.7 x 14.4 mm N45 nickel - holds 12 kg

Quantity	Price / pcs
To 2 pcs	€4.28 *
from 3 pcs	€3.73 *
from 10 pcs	€3.34 *
from 20 pcs	€3.08 *
from 40 pcs	€2.91 *
from 220 pcs	request a quote!

The prices are VAT included plus extra charges for shipping

Ready for shipment, delivery in 2-4 days

1 pieces: € *

Item number: QM-42.1x5.7x14.4-N
EAN: 4250538408151
Manufacturer: magnets4you
Available on stock: 342 pieces

Elongated neodymium magnet with nickel coating and a special direction of magnetization. This... more

Close menu

Product information

Elongated neodymium magnet with nickel coating and a special direction of magnetization.
This magnet is magnetized by the dimension 14.4 mm. This means that the magnetic poles are located on the lead 42.1 x 5.7 mm surfaces.

Technical specifications

volume	3456 mm³
coating	Nickel (Ni-Cu-Ni)
temperature max.	80 ° C
quality of magnetisation	N45
tolerance	0.1 mm
material	Neodym
direction of magnetisation	axial
total height H	14,4 mm
total length L	42,1 mm
weight	0,0262623 kg
magnetic force	12,000 kg
total width B	5,7 mm

Technical specifications for magnetization grade N45

Material	Remanence		Coercivity				Energy product		Maximum temperature
	Br		bHc		iHc		(BxH)max
	Gauss (G)	Tesla (T)	kOe	kA/m	kOe	kA/m	MGOe	kJ/m ³	°C
N45	13200-13700	1.32-1.37	10.8-12.5	860-995	≥ 12	≥ 955	43-45	342-358	≤ 80

The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EG - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
No subject to registration under the REACH Regulation.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.