Thousands of products in stock
Large cone magnet Ø 29 mm red - holds 2.8 kg
Product number:
KM-3-R
-
Daily shipping and fast delivery
-
No minimum order value
-
Personal advice
Our largest cone magnets have a diameter of 29 mm and are equipped with a neodymium magnet.
With an adhesive force of approx. 2.8 kg, you can attach around 30 A4 sheets of paper to a pin board.
With an adhesive force of approx. 2.8 kg, you can attach around 30 A4 sheets of paper to a pin board.
Due to the cone shape, the magnets can be gripped very well.
These magnets, in different colors, are very well suited for white boards, refrigerators, metal panels and other metallic surfaces.
Due to their size, the pin board magnets can also be used for visualization on notice boards.
Due to their size, the pin board magnets can also be used for visualization on notice boards.
These office magnets are available in six different colors:
White, black, blue, yellow, green and red
White, black, blue, yellow, green and red
These cone magnets are delivered in Bilster packaging of 10 pieces.
Order 10 pieces - you get 1 set with 10 magnets each
Order 20 pieces - you get 2 sets with 10 magnets each
Order 10 pieces - you get 1 set with 10 magnets each
Order 20 pieces - you get 2 sets with 10 magnets each
Technical specifications
| Diameter: | 29 mm |
|---|---|
| Height H: | 38,5 mm |
| Adhesive force: | 2,8 kg |
| Material: | Neodymium |
| Magnetization direction: | bipolar |
| Diameter neck: | 7,3 mm |
| Superior diameter: | 12,3 mm |
| Base height: | 12 mm |
| Weight: | 20 g |
EAN:
4250538422027
Manufacturer:
magnets4you
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
Please note the safety instructions for this product.