Neodymium pot magnet Ø 32.0 x 8.0 mm with countersink

Preview: Neodymium pot magnet Ø 32.0 x 8.0 mm with countersink - 150°C

Quantity	Price / pcs
To 2 pcs	€7.99 *
from 3 pcs	€7.03 *
from 10 pcs	€6.15 *
from 20 pcs	€5.59 *
from 40 pcs	€5.35 *
from 160 pcs	request a quote!

The prices are VAT included plus extra charges for shipping

Ready for shipment, delivery in 2-4 days

Place your order within the next :: hours
and we'll ship your delivery today!
(Not possible with advance payment)

1 pieces: € *

Item number: NFS-32-Z-SH
EAN: 4250538418785
Manufacturer: magnets4you
Available on stock: 1018 pieces

The special thing about this pot magnet with countersunk, is the operating temperature. It is... more

Close menu

Product information

The special thing about this pot magnet with countersunk, is the operating temperature.
It is identical in construction with our Neodymium pot magnet Ø 32.0 x 8.0 mm with counterbore holds 30 kg
However, this pot magnet can be used up to 150 ° C, in contrast to 80 ° C with the standard magnet.
Very well suited for installation in industrial furnaces or when building lamps.
So wherever it can get warmer.

Technical specifications

total diameter D	32,0 mm
diameter on top d2	5,5 mm
diameter at the bottom d3	10,4 mm
coating	Zink
temperature max.	150 ° C
quality of magnetisation	N38SH
material	Neodym
tolerance	0.1 mm
magnetic force	30,000 kg
weight	0,0375 kg
total height H	8,0 mm

Technical specifications for magnetization grade N38SH

Material	Remanence		Coercivity				Energy product		Maximum temperature
	Br		bHc		iHc		(BxH)max
	Gauss (G)	Tesla (T)	kOe	kA/m	kOe	kA/m	MGOe	kJ/m ³	°C
N38SH	12200-12600	1.22-1.26	10.8-11.5	860-915	≥ 20	≥ 1592	36-38	287-303	≤ 150

The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EG - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
No subject to registration under the REACH Regulation.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.