Thousands of products in stock
Magnetic system 100 x 23 x 32 with base plate, screwable - 29 kg
Product number:
MS-100x23x32
-
Daily shipping and fast delivery
-
No minimum order value
-
Personal advice
This magnet system was specially designed for use at temperatures where normal magnets have no chance!
Because if most ferrite magnets irreversibly lose their performance at a maximum of 250 ° C, these systems can show their full potential.
In drying and industrial furnaces, in hot oils or in gas-shielded welding and flame cutting.
For all these applications where a strong magnet is needed to hold, align or transport metal parts, this system is exactly the right one!
Because if most ferrite magnets irreversibly lose their performance at a maximum of 250 ° C, these systems can show their full potential.
In drying and industrial furnaces, in hot oils or in gas-shielded welding and flame cutting.
For all these applications where a strong magnet is needed to hold, align or transport metal parts, this system is exactly the right one!
This magnetic rail is also available in 2 other sizes / adhesive strengths.
- Total length with base plate: 134 mm
- Total height with base plate: 35 mm
- Total width: 23 mm
- Magnet body length: 100 mm
- Height of magnet body: 32 mm
- Distance between mounting holes: 114 mm
- Screw connection over the base plate using 2 holes Ø 7.5 mm
- Hole spacing (middle / middle): 114 mm
- welded system with ground adhesive surface
- black lacquered surface
- heavy duty
- max.use up to 300 °
Technical specifications
| Lenght: | 134 mm |
|---|---|
| Width: | 23 mm |
| Height H: | 35 mm |
| Adhesive force: | 29 kg |
| Maximum temperature: | 300 °C |
| Weight: | 490 g |
EAN:
4250538413544
Manufacturer:
magnets4you
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
Please note the safety instructions for this product.