Door magnet neodymium to screw on with counterpart

Quantity	Price / Set
To 2 Set	€4.15 *
from 3 Set	€3.83 *
from 10 Set	€3.53 *
from 20 Set	€3.12 *
from 30 Set	€2.91 *
from 300 Set	request a quote!

The prices are VAT included plus extra charges for shipping

Ready for shipment, delivery in 2-4 days

1 Set: € *

Item number: TUEM-23
EAN: 095421075737
Manufacturer: magnets4you
Available on stock: 116 Set

This magnetic solution is ideal for flush installation in pieces of furniture or doors. For... more

Close menu

Product information

This magnetic solution is ideal for flush installation in pieces of furniture or doors.
For example, you can keep doors closed or fix an open door.
First drill the corresponding hole (opposite) with a Forstner or normal wood drill bit.
Then you press the magnet and the matching metal disk into the hole and screw them tight with the screws provided.
To prevent the closing noise (clacking), the supplied pads can be stuck on.

Available in 5 sizes with magnetic holding forces from 1 to 13 kg.
Each set includes a steel housing for a neodymium magnet, a strike plate, noise damper and mounting screws.

Article no.	Content:	Adhesive force:	Magnet dimension	Metal disc dimension	Drilling Metal disc	Screw length
TUEM-02	4 Sets	0,9 kg	Ø 9.7 x 6.4 mm	Ø 10.0 x 3.5 mm	Ø 3.5 mm	14 mm
TUEM-06	2 Sets	2,7 kg	Ø 12.7 x 6.4 mm	Ø 12.7 x 3.5 mm	Ø 3.5 mm	14 mm
TUEM-16	2 Sets	7,5 kg	Ø 15.9 x 6.4 mm	Ø 15.9 x 3.5 mm	Ø 3.5 mm	14 mm
TUEM-23	1 Set	10,4 kg	Ø 22.2 x 7.1 mm	Ø 22.2 x 4.0 mm	Ø 5.5 mm	20 mm
TUEM-30	1 Set	13,0 kg	Ø 28.7 x 6.8 mm	Ø 28.7 x 4.0 mm	Ø 5.5 mm	20 mm

Technical specifications

Weight

47 g / Set

The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EG - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
No subject to registration under the REACH Regulation.
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.