Discmagnet Ø 25.0 x 2.0 mm N35 nickel - self-adhesive-FT

This neodymium disc magnet is equipped on one side with a strong, self-adhesive padding foam.
In contrast to our normal self-adhesive magnets, these stick particularly well to the surface.
The protective film on the adhesive side can be easily peeled off through a small tab.

However, the adhesive force of approx. 3 kg per magnet is also noteworthy.
Due to the great magnetic power, even heavier objects can be attached to metallic surfaces.

If you order 10 pieces, you will receive 5 pairs of magnets.
With 20 pieces you get 10 pairs of magnets, etc .....

These power magnets are delivered in pairs on a carrier tape.
So that you always get a magnet with a south pole and a magnet with a north pole on the self-adhesive side.

So that the foam adhesive is not compressed during storage, the delivery takes place in plastic tubes, each with 10 disc magnets.

Adhesive film: 3M4920 (upholstery foam)
Thickness of the adhesive layer: 0.4 mm

• The product conforms to the European RoHS Community legislation

  The product conforms to the European RoHS Community legislation (2002/95/EG - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
  No subject to registration under the REACH Regulation.

• Safety Notice

  NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!