Discmagnet Ø 6.0 x 2.0 mm N45 Epoxy - holds 700 g
Quantity | Unit price |
---|---|
From 10 pieces |
€0.36*
|
From 40 pieces |
€0.29*
|
From 80 pieces |
€0.26*
|
From 160 pieces |
€0.24*
|
From 1000 pieces | Request price! |
Available, delivery time: 1-3 working days
Product information "Discmagnet Ø 6.0 x 2.0 mm N45 Epoxy - holds 700 g"
Technical specifications
Adhesive force: | 700 g |
---|---|
Coating: | Epoxy (Ni-Cu-Ni-EP) |
Diameter: | 6 mm |
Height H: | 2 mm |
Magnetization direction: | axial (parallel to height) |
Magnetization quality: | N45 |
Material: | Neodymium |
Maximum temperature: | 80 °C |
Tolerance: | +/- 0,1 mm |
Volume: | 57 mm³ |
Weight: | 0,43 g |
Technical specifications for magnetization grade N45
Material | Remanence | Coercivity | Energy product | Maximum temperature | |||||
---|---|---|---|---|---|---|---|---|---|
Br | bHc | iHc | (BxH)max | ||||||
Gauss (G) | Tesla (T) typ. | kOe | kA/m | kOe | kA/m | MGOe | kJ/m 3 | ||
N45 | 13200-13700 | 1.32-1.37 | 10.8-12.5 | 860-995 | ≥ 12 | ≥ 955 | 43-45 | 342-358 | ≤ 80 |
The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
Login
11 November 2015 14:22
Ich habe die Magneten bestellt um einzelne Komponenten eines 3D-Drucks miteinander zu verbinden. Nach dem Abformen des Ur-Models wurden die Magenten in die Gussform direkt eingebracht
6 September 2016 09:32
Verwendung im Modellbau für Modellbauer sehr gute Qualität
17 February 2017 09:59
Gut verklebbar
13 March 2017 12:32
Experiment
2 June 2017 13:06
sehr kleiner und starker Magnet
11 June 2017 15:09
Artikel wie gewünscht und beschrieben. Magnete sind stark.
14 September 2017 09:38
Reed switch trigger
10 January 2019 06:57
Alles wie es sein soll
12 April 2019 17:16
Magnete halten was sie versprechen.
18 April 2019 19:20
... sehr spezielle Anwendung; extremes Anforderungsprofil