Blockmagnet 20.0 x 10.0 x 1.0 mm N45 nickel - self-adhesive

Please note the safety instructions for this product.

Quantity	Unit price
From 10 pieces	€0.50*
From 60 pieces	€0.44*
From 140 pieces	€0.40*
From 360 pieces	€0.36*
From 1500 pieces	Request price!

All prices include statutory VAT, shipping costs excluded.

14 Reviews

Item currently not available

Product number: QM-20x10x01-N-sk

EAN: 4250538413094

Manufacturer: magnets4you

Packaging unit: 10 pieces

Please note the safety instructions for this product.

Product information "Blockmagnet 20.0 x 10.0 x 1.0 mm N45 nickel - self-adhesive"

These platelets are self-adhesive on one side and are packaged in pairs on a carrier tape.
This means that two cuboids always lie exactly on top of each other and adhere to each other. For example, you can use it as an elegant fastener for folders.

Adhesive film: 3M467

Technical specifications

Adhesive force:	800 g
Coating:	Nickel (Ni-Cu-Ni)
Height H:	1 mm
Lenght:	20 mm
Magnetization direction:	axial (parallel to height)
Magnetization quality:	N45
Maximum temperature:	80 °C
Tolerance:	+/- 0,1 mm
Volume:	200 mm³
Weight\|kg:	1,5 g
Width:	10 mm

Technical specifications for magnetization grade N45

Material	Remanence		Coercivity				Energy product		Maximum temperature
	Br		bHc		iHc		(BxH)max
	Gauss (G)	Tesla (T) typ.	kOe	kA/m	kOe	kA/m	MGOe	kJ/m ³
N45	13200-13700	1.32-1.37	10.8-12.5	860-995	≥ 12	≥ 955	43-45	342-358	≤ 80

The product conforms to the European RoHS Community legislation

The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.

Safety Notice

NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!

Determination of the magnetic force

The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.