Thousands of products in stock
Medium cone magnet Ø 19 mm blue - holds 2.3 kg
-
Daily shipping and fast delivery
-
No minimum order value
-
Personal advice
Large cone SET - handy - practical - colorful!
With a dead weight of 7 g, the adhesive force corresponds to about 2.3 kg.
This magnet can therefore hold approx. 25 A4 sheets of paper on a metal wall without any problems.
The mixed set of cone magnets consists of 2 pieces each of the colors:
With a dead weight of 7 g, the adhesive force corresponds to about 2.3 kg.
This magnet can therefore hold approx. 25 A4 sheets of paper on a metal wall without any problems.
It is therefore many times stronger than commercially available magnets.
The mixed set of cone magnets consists of 2 pieces each of the colors:
- black
- blue
- red
- yellow
- purple
Technical specifications
| Diameter: | 19 mm |
|---|---|
| Height H: | 25 mm |
| Adhesive force: | 2,3 kg |
| Material: | Neodymium |
| Magnetization quality: | N35 |
| Magnetization direction: | axial (parallel to height) |
| Diameter neck: | 6,5 mm |
| Superior diameter: | 10 mm |
| Base height: | 7 mm |
| Weight: | 7 g |
| Tolerance: | 0.5 mm |
Technical specifications for magnetization grade N35
| Material | Remanence | Coercivity | Energy product | Maximum temperature | |||||
|---|---|---|---|---|---|---|---|---|---|
| Br | bHc | iHc | (BxH)max | ||||||
| Gauss (G) | Tesla (T) typ. | kOe | kA/m | kOe | kA/m | MGOe | kJ/m 3 | ||
| N35 | 11700-12100 | 1.17-1.21 | 10.8-11.5 | 860-915 | ≥ 12 | ≥ 955 | 33-35 | 263-279 | ≤ 80 |
EAN:
4250538401299
Manufacturer:
magnets4you
Product number:
KM-2-B
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
Please note the safety instructions for this product.