Thousands of products in stock
Magnetic strip with hard ferrite in a galvanized U-profile, 203 mm
Product number:
ML-203-Z
-
Daily shipping and fast delivery
-
No minimum order value
-
Personal advice
This magnetic strip consists of a galvanized U-profile with two mounting holes and glued, recessed ferrite magnets.
On the one hand, the magnetic flat strip can be screwed on and holds metallic objects (tools, keys) on the magnetic side - the classic magnetic strip in the workshop.
On the other hand, signs, sheets or license plates, for example, can be perfectly attached to metallic substrates.
Due to the long design and the high adhesive force, the strip offers good security against twisting.
Another advantage is that it can be installed in grooves, whereby the flat strips can also be fastened with two screws.
Hole spacing: 17.8 mm
Mounting holes: 10.5 x 7 mm
Mounting holes: 10.5 x 7 mm
Technical specifications
| Lenght: | 203 mm |
|---|---|
| Width: | 26 mm |
| Height H: | 12,5 mm |
| Adhesive force: | 20 kg |
| Material: | Ferrite |
| Maximum temperature: | 100 °C |
| Coating: | Zinc |
| Weight: | 230 g |
EAN:
4250538417184
Manufacturer:
magnets4you
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
Please note the safety instructions for this product.