Thousands of products in stock
Ferrite pot magnet Ø 16.0 x 4.5 mm, internal thread M3, 1.8 kg
-
Daily shipping and fast delivery
-
No minimum order value
-
Personal advice
Technical specifications
| Diameter: | 16 mm |
|---|---|
| Height H: | 11,5 mm |
| Adhesive force: | 1,8 kg |
| Material: | Ferrite |
| Magnetization quality: | HF 26/22 |
| Maximum temperature: | 200 °C |
| Coating: | Zinc |
| Magnetization direction: | anisotropic |
| Diameter neck: | 6 mm |
| Thread: | M3 |
| Neck height: | 7 mm |
| Weight: | 6 g |
| Tolerance: | +/- 0,1 mm |
The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
Safety Notice
Hard ferrite magnets are not toys! They are extremely hard and brittle, as they belong to ceramic materials.
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
Accessories
| From 10 pieces |
€0.24*
|
|---|---|
| From 40 pieces |
€0.22*
|
| From 80 pieces |
€0.20*
|
| From 160 pieces |
€0.19*
|
| From 2500 pieces | Request price! |
