Rotatable neodymium magnetic hook Ø 25 mm, black - holds 20 kg

Please note the safety instructions for this product.

Quantity	Unit price
To 2 pieces	€4.90*
From 3 pieces	€4.36*
From 10 pieces	€3.83*
From 20 pieces	€3.57*
From 40 pieces	€3.35*
From 240 pieces	Request price!

All prices include statutory VAT, shipping costs excluded.

Available, delivery time: 1-3 working days

1 pieces: 0,00 € *

pieces

Product number: HM-25-N-SI

EAN: 4250538424984

Manufacturer: magnets4you

On Stock: 1675 pieces

Please note the safety instructions for this product.

Product information "Rotatable neodymium magnetic hook Ø 25 mm, black - holds 20 kg"

No matter how you attach this pot , the hook always points in the desired pulling direction. The hook can also be rotated 360°.

The magnetic hook achieves the highest stated holding force of 20 kilos when it is pulled vertically from a 1 cm iron plate. When used horizontally, the four-push force is noticeably lower.

To protect the metallic surface, this magnetic plate is again supplied with a rubber cap. This protects the adhesive base from damage and scratches. However, the protective cap reduces the magnetic force. To make optimal use of the adhesive force, use this magnetic hook without the rubber cap.

Technical specifications

Adhesive force:	20 kg
Base height:	15 mm
Coating:	Nickel
Diameter:	25 mm
Magnetization quality:	N38
Material:	Neodymium
Tolerance:	+/- 0,1 mm
Weight:	37 g

Technical specifications for magnetization grade N38

Material	Remanence		Coercivity				Energy product		Maximum temperature
	Br		bHc		iHc		(BxH)max
	Gauss (G)	Tesla (T) typ.	kOe	kA/m	kOe	kA/m	MGOe	kJ/m ³
N38	12200-12600	1.22-1.26	10.8-11.5	860-915	≥ 12	≥ 955	36-38	287-303	≤ 80

The product conforms to the European RoHS Community legislation

The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices. This product is not subject to registration according to REACH.

Safety Notice

NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!

Determination of the magnetic force

The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.