Thousands of products in stock
Neodymium pot magnet Ø 32.0 x 8.0 mm with countersink - 150°C
-
Daily shipping and fast delivery
-
No minimum order value
-
Personal advice
It is identical in construction with our Neodymium pot magnet Ø 32.0 x 8.0 mm with counterbore holds 30 kg
However, this pot magnet can be used up to 150 ° C, in contrast to 80 ° C with the standard magnet.
Very well suited for installation in industrial furnaces or when building lamps.
So wherever it can get warmer.
Technical specifications
| Diameter: | 32 mm |
|---|---|
| Height H: | 8 mm |
| Adhesive force: | 30 kg |
| Material: | Neodymium |
| Magnetization quality: | N38SH |
| Maximum temperature: | 150 °C |
| Coating: | Zinc |
| Bore depth: | 3,1 mm |
| Superior diameter: | 5,5 mm |
| Lower diameter: | 10,4 mm |
| Weight: | 37,5 g |
| Tolerance: | +/- 0,1 mm |
Technical specifications for magnetization grade N38SH
| Material | Remanence | Coercivity | Energy product | Maximum temperature | |||||
|---|---|---|---|---|---|---|---|---|---|
| Br | bHc | iHc | (BxH)max | ||||||
| Gauss (G) | Tesla (T) typ. | kOe | kA/m | kOe | kA/m | MGOe | kJ/m 3 | ||
| N38SH | 12200-12600 | 1.22-1.26 | 10.8-11.5 | 860-915 | ≥ 20 | ≥ 1592 | 36-38 | 287-303 | ≤ 150 |
The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
