VarioBox magnet 18 kg - system for lifting, hanging, screwing

With this magnet system you can, for example, attach signs to metallic surfaces - without any risk.
This system is also intended for the easy lifting of objects, even in confined areas.

The eyelet holder can be attached to the magnet system on the top as well as on the side - the system can also be easily and quickly screwed to many surfaces using the existing holders.

This enables numerous as well as complex application possibilities!

• with variable eyelet for lifting, holding or hanging
• with 2 powerful ferrite magnet inserts with pole pieces
• Resistant plastic housing with side rubber impact protection
• for hanging loads of up to 18 kg

Total length of the eyebolt: 52.0 mm
Inner diameter eyelet: 12.5 mm
Thread eyebolt: M5

Delivery with magnetic covers and lock nuts

• Determination of the magnetic force

  The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.