Skip to main content
Thousands of products in stock
No minimum order value
No surcharge for small quantities
Daily shipping
Flexible payment options

5 minutes epoxy adhesive Fast-curing 2-component adhesive

Product information "5 minutes epoxy adhesive Fast-curing 2-component adhesive"

The 5 minute epoxy adhesive is a 2-component adhesive and is ideal for securely gluing magnets!
 
It is suitable for visually demanding bonds and bonds a variety of materials, such as metal, ferrite, marble, ceramics, stone, wood, concrete and plastic.
In addition, the adhesive can be painted over, is waterproof and shockproof.
 
Important instructions:
The epoxy adhesive consists of two components: Epoxy resin and hardener.
These are stored separately from each other.
Only when the adhesive is to be used are the two substances mixed together.

Handling is very easy with the handy double syringe (twin syringe).
Mixing takes place automatically when the syringe is used.
Please note: the mixing ratio should be 1:1 for larger quantities.
 
Application:
In order to achieve the best result, the surface should be clean and free of grease!
First, break off the tip. Now put the enclosed syringe on top and the mixing takes place automatically by squeezing out the tube.
Alternatively, you are welcome to mix it yourself.
To do this, squeeze out the glue and mix both substances for about a minute with the stick from the flask or another object.
Now apply the glue to the parts that you want to glue and bring them together.
Then please give the adhesive rest to harden.
A room temperature of approx. 20 ° C is required for this.
Hand strength is achieved after approximately 12 minutes.
After approx. 30 minutes the adhesive is ready for further treatment.
Once 24 hours have passed, it is fully cured.
Please note, however, that the curing times depend on the room temperature!
After use, please close the seal with the seal in the stamp.
 
Notes to purchase:
Each adhesive is supplied with a mixing nozzle.
You can also order the replacement nozzle in our shop: Mixing nozzle for epoxy adhesive (EPK-25) with bayonet lock

Technical specifications:
Processing time: 5 minutes
Hand strength: approx. 5 - 10 minutes
Color: clear, colorless
Viscosity: 25 Pa-s
Operating temperature: up to 120 degrees
Contents: 25 ml
 
Safety instructions:
R22: Harmful if swallowed.
R36 / 38: Irritating to eyes and skin.
R43 May cause sensitization by skin contact.
R51 / 53: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
S26: In case of contact with eyes, rinse immediately with water and consult a doctor.
S28.2: In case of contact with skin wash off immediately with soap and water.
S37 / 39: Wear suitable protective gloves and safety glasses / face protection.
S60: This product and its container must be disposed of as hazardous waste.
S61: Avoid release to the environment.
 
Obtain special instructions before use / consult safety data sheet before use.
Contains epoxy compounds.
Follow the manufacturer's instructions.

Technical specifications

Weight: 50 g

The product conforms to the European RoHS Community legislation

The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.

10 of 21 reviews

Average rating of 4.9 out of 5 stars


90%

10%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


8 November 2017 08:31

Review with rating of 5 out of 5 stars

super klebekraft

30 December 2019 07:34

Review with rating of 5 out of 5 stars

Das Produkt erfüllte die Erwartungen und ließ sich gut Verarbeiten.

27 October 2019 19:53

Review with rating of 5 out of 5 stars

Sehr gute Qualität.

16 September 2019 19:22

Review with rating of 5 out of 5 stars

Ist super um Plastik zu kleben

11 August 2019 20:57

Review with rating of 5 out of 5 stars

Bin mit dem Artikel sehr zufrieden

15 February 2019 08:49

Review with rating of 5 out of 5 stars

der Kleber ist wirklich super - seit ich ihn kenne meine Nr. 2 - die Nr. 1 ist aber auch mit *** fast 10x so teuer.

12 November 2018 08:11

Review with rating of 5 out of 5 stars

super kleber für kleines geld.

18 September 2018 18:09

Review with rating of 5 out of 5 stars

Der beste 2 K Kleber für diesen Preis. Klebe sehr viel Kunststoff und das funktioniert bestens.

22 January 2018 19:18

Review with rating of 5 out of 5 stars

zum kleben von Kunststoff

14 November 2017 14:27

Review with rating of 5 out of 5 stars

Ich bin sehr zufrieden mit den Kleber! Wie beschrieben! Kann ich nur weiterempfehlen! Besten Dank

Accessories

Average rating of 5 out of 5 stars

Mixing nozzle with bayonet lock for EPK-25 / AMK-24 / EMK-24
Item number: MT-EPK
On Stock: 1611 pieces

Available, delivery time: 1-3 working days

Quantity Unit price
To 49 pieces
€0.95*
From 50 pieces Request price!
Pieces