450 kg power recovery magnet 200 mm with eyelet and 20 meters of rope

Preview: 450 kg power recovery magnet 200 mm with eyelet and 20 meters of rope

Quantity	Price / pcs
To 2 pcs	€99.50 *
from 3 pcs	€94.53 *
from 10 pcs	€85.05 *
from 20 pcs	request a quote!

The prices are VAT included plus extra charges for shipping

Ready for shipment, delivery in 2-4 days

1 pieces: € *

Item number: BM-200x60x30
EAN: 4250538421983
Manufacturer: magnets4you
Available on stock: 14 pieces

The professional among the waterproof recovery magnets for treasure hunters! With the... more

Close menu

Product information

The professional among the waterproof recovery magnets for treasure hunters!

With the adhesive force of 450 kg you can pull almost all metallic objects out of the water.
This elongated recovery magnet is a must for all magnetic anglers. Due to its length of 200 mm, you have a wider contact surface and thus a higher chance of recovering metal parts from water / lakes.

Screw the supplied stainless steel ring nut onto the threaded pin. Attach one end of the rope to the eyelet with a strong knot. And you're ready to go. Now let the rubberized magnet on the rope into the water. Due to the higher weight, the magnet falls to the floor and can be pulled along the floor easily.

You are sure to find small or large metallic objects such as coins, chains, badges, medals, knives, etc.

Important instructions: -
In some waters there may still be ordnance / duds.
Please be especially careful here.
If you do find an ordnance, inform the ordnance disposal service immediately and do not try to loosen the magnet yourself.
- If you really find a treasure, you are normally not allowed to keep it.
For the rest of the process, please note the legal requirements.

Technical specifications:
Holding magnet system with neodymium magnets in N40M, sintered
Length: 201 mm
Width: 61 mm
Height without bolts: 28 mm
Bolts: M10 x 26 mm made of stainless steel 1.4404
Magnetized by the height
Downward force 450 kg
Shifting force lengthways 102 kg
Coating: rubberized
Colour: blue

Scope of delivery:

1 holding magnet with an adhesive force of 450 kg

1 piece ring nut M10 made of stainless steel

20 meters of polypropylene rope Ø 6 mm

Technical specifications

coating	gummiert
temperature max.	80 ° C
quality of magnetisation	N40M
thread m	M10
material	Neodym
colour	blau
weight	2,1 kg
magnetic force	450 kg
total height H	28 mm
total length L	200 mm
total width B	61 mm

The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EG - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
No subject to registration under the REACH Regulation.
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.