This small carabiner hook with a load capacity of 230 kg can not only be used for magnetic fishing. Thanks to the galvanized (rust-inhibiting) surface, the fire brigade carabiner hook can also be used outdoors and indoors. Due to the safety screw cap, the hook cannot open by itself.
You can use the carabiner hook as an intermediate piece between the magnet and the rope so that you are flexbiel with magnetic fishing. So you can easily use different recovery magnets and change them easily.
The carabiner hook must not be used for climbing.
Dimensions (see picture):
L: 80.0 mm
A: 11.5 mm
B: 39.0 mm
E: 8.0 mm
D: 8.0 mm
Fire brigade carabiners in industrial quality, similar to DIN 5299
Form: C with screw cap
total length L
The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EG - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices. No subject to registration under the REACH Regulation.
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N).
A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded.
Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.