Thousands of products in stock
Magnet system Ø 43 mm rubberized with thread M6x15 - holds 10 kg
-
Daily shipping and fast delivery
-
No minimum order value
-
Personal advice
Very good for the residue-free attachment of, for example, signs on your car.
The rubber-coated magnet systems are magnetic adhesive systems that can be used primarily on sheet metal with sensitive surfaces (paint, chrome, nickel, etc.).
The rubber-like consistency of Santoprene® protects the sensitive surfaces from scratches (provided the surfaces are clean).
In addition, the high coefficient of friction of Santoprene® against metallic surfaces results in high lateral static friction forces.
Shear force: 3 kg
Technical specifications
| Diameter: | 43 mm |
|---|---|
| Height H: | 21 mm |
| Adhesive force: | 10 kg |
| Material: | Neodymium |
| Magnetization quality: | N35 |
| Maximum temperature: | 80 °C |
| Magnetization direction: | Multipole-anisotropic |
| Thread length: | 15 mm |
| Thread: | M6 |
| Base height: | 6 mm |
| Weight: | 32 g |
Technical specifications for magnetization grade N35
| Material | Remanence | Coercivity | Energy product | Maximum temperature | |||||
|---|---|---|---|---|---|---|---|---|---|
| Br | bHc | iHc | (BxH)max | ||||||
| Gauss (G) | Tesla (T) typ. | kOe | kA/m | kOe | kA/m | MGOe | kJ/m 3 | ||
| N35 | 11700-12100 | 1.17-1.21 | 10.8-11.5 | 860-915 | ≥ 12 | ≥ 955 | 33-35 | 263-279 | ≤ 80 |
The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
