Thousands of products in stock
Magnet system 74 x 45 mm rubberized with M8x15 thread, holds 36 kg
-
Daily shipping and fast delivery
-
No minimum order value
-
Personal advice
It is also possible to place it quietly on metal.
The magnet systems can also be used outdoors.
However, if used outdoors for long periods of time, rust can form.
At the same time, the internal metal element shields the magnetic field on the back and also ensures that, unlike pot systems, the magnetic field works deeper and can bridge larger gaps.
Technical specifications
| Lenght: | 74 mm |
|---|---|
| Width: | 45 mm |
| Height H: | 23,5 mm |
| Adhesive force: | 36 kg |
| Color: | Black |
| Material: | Neodymium |
| Magnetization quality: | N35 |
| Maximum temperature: | 80 °C |
| Thread length: | 15 mm |
| Thread: | M8 |
| Weight: | 111 g |
| Sheathing: | TPE rubber lining |
| Shear Force: | 13 kg |
Technical specifications for magnetization grade N35
| Material | Remanence | Coercivity | Energy product | Maximum temperature | |||||
|---|---|---|---|---|---|---|---|---|---|
| Br | bHc | iHc | (BxH)max | ||||||
| Gauss (G) | Tesla (T) typ. | kOe | kA/m | kOe | kA/m | MGOe | kJ/m 3 | ||
| N35 | 11700-12100 | 1.17-1.21 | 10.8-11.5 | 860-915 | ≥ 12 | ≥ 955 | 33-35 | 263-279 | ≤ 80 |
The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices. This product is not subject to registration according to REACH.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.