Magnet system 59 x 45 mm rubberized with thread M6x15, holds 24 kg
Quantity | Unit price |
---|---|
To 4 pieces |
€9.15*
|
From 5 pieces |
€8.69*
|
From 10 pieces |
€8.24*
|
From 25 pieces |
€7.78*
|
From 50 pieces |
€7.32*
|
From 150 pieces | Request price! |
Available, delivery time: 1-3 working days
Product information "Magnet system 59 x 45 mm rubberized with thread M6x15, holds 24 kg"
The rubber jacket made of TPE (thermoplastic elastomer) protects the surface, prevents scratches and increases slip resistance when used horizontally.
However, if used outdoors for long periods of time, rust can form.
At the same time, the internal metal element shields the magnetic field on the back and also ensures that, unlike pot systems, the magnetic field works deeper and can bridge larger gaps.
Technical specifications
Adhesive force: | 24 kg |
---|---|
Color: | Black |
Height H: | 23,5 mm |
Lenght: | 59 mm |
Magnetization quality: | N35 |
Material: | Neodymium |
Maximum temperature: | 80 °C |
Shear Force: | 9 kg |
Sheathing: | TPE rubber lining |
Thread: | M6 |
Thread length: | 15 mm |
Weight: | 86 g |
Width: | 45 mm |
Technical specifications for magnetization grade N35
Material | Remanence | Coercivity | Energy product | Maximum temperature | |||||
---|---|---|---|---|---|---|---|---|---|
Br | bHc | iHc | (BxH)max | ||||||
Gauss (G) | Tesla (T) typ. | kOe | kA/m | kOe | kA/m | MGOe | kJ/m 3 | ||
N35 | 11700-12100 | 1.17-1.21 | 10.8-11.5 | 860-915 | ≥ 12 | ≥ 955 | 33-35 | 263-279 | ≤ 80 |
The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices. This product is not subject to registration according to REACH.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
Login