Magnet system Ø22 mm gummed with thread M4x6 - holds 5.8 kg

Bei den gummiummantelten Magnetsystemen handelt es sich um magnetische Haftsysteme, die vor allem auf Blechen mit empfindlichen Oberflächen (Lack, Chrom, Nickel usw.) eingesetzt werden können. Durch die gummiartige Konsistenz von Santoprene® werden die empfindlichen Oberflächen gegen Verkratzen geschützt (sofern die Oberflächen sauber sind). Außerdem erhält man durch den hohen Reibungskoeffizienten von Santoprene® gegen metallische Oberflächen hohe seitliche Haftreibungskräfte.
Scherkraft: 1,5 kg

Technical specifications

height of disc h1	6,0 mm
temperature max.	60 ° C
quality of magnetisation	N35
length of thread h6	6,5 mm
thread m	M4
material	Neodym
total diameter D	22,0 mm
weight	0,011 kg
total height H	12,5 mm
magnetic force	5,800 kg

Technical specifications for magnetization grade N35

Material	Remanence		Coercivity				Energy product		Maximum temperature
	Br		bHc		iHc		(BxH)max
	Gauss (G)	Tesla (T)	kOe	kA/m	kOe	kA/m	MGOe	kJ/m 3	°C
N35	11700-12100	1.17-1.21	10.8-11.5	860-915	≥  12	≥  955	33-35	263-279	≤  80

• The product conforms to the European RoHS Community legislation

  The product conforms to the European RoHS Community legislation (2002/95/EG - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
  No subject to registration under the REACH Regulation.

• Safety Notice

  NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!

• Determination of the magnetic force

  The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.