Thousands of products in stock
Ring magnet Ø 8.0 x 2.0 x 6.0 mm N50 nickel - holds 2.4 kg
-
Daily shipping and fast delivery
-
No minimum order value
-
Personal advice
Technical specifications
| Diameter: | 8 mm |
|---|---|
| Height H: | 6 mm |
| Adhesive force: | 2,4 kg |
| Material: | Neodymium |
| Magnetization quality: | N50 |
| Maximum temperature: | 80 °C |
| Coating: | Nickel (Ni-Cu-Ni) |
| Magnetization direction: | axial (parallel to height) |
| Inner diameter: | 2 mm |
| Volume: | 283 mm³ |
| Weight: | 2,15 g |
| Tolerance: | +/- 0,1 mm |
Technical specifications for magnetization grade N50
| Material | Remanence | Coercivity | Energy product | Maximum temperature | |||||
|---|---|---|---|---|---|---|---|---|---|
| Br | bHc | iHc | (BxH)max | ||||||
| Gauss (G) | Tesla (T) typ. | kOe | kA/m | kOe | kA/m | MGOe | kJ/m 3 | ||
| N50 | 14000-14600 | 1.40-1.46 | 10.8-12.5 | 860-995 | ≥ 12 | ≥ 955 | 47-51 | 374-406 | ≤ 80 |
The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.