Ringmagnet Ø 42.0 x 4,5 x 4.0 mm N35 nickel with counterbore north

Preview: Ringmagnet Ø 42.0 x 4,5 x 4.0 mm N35 nickel with counterbore north

This item is currently not available!

This item will be available again 22.09.2021

Notify me as soon as the item is available.

Quantity	Price / pcs
To 2 pcs	€4.82 *
from 3 pcs	€4.22 *
from 10 pcs	€3.68 *
from 20 pcs	€3.42 *
from 40 pcs	€3.18 *
from 220 pcs	request a quote!

The prices are VAT included plus extra charges for shipping

This item is not available at the moment

Item number: RMS-42x04x04-N-NP
EAN: 4250538423079
Manufacturer: magnets4you

This ring magnet Ø 42 mm made of neodymium with a 90 ° countersink can be screwed on with a... more

Close menu

Product information

This ring magnet Ø 42 mm made of neodymium with a 90 ° countersink can be screwed on with a countersunk screw.
The 4.5 mm hole is designed for a screw with a diameter of 4 mm.

This magnet has the north pole on the depression side.

Note: You cannot use two of these magnets in pairs, i.e. the magnets do not stick to one another with the countersunk side, but repel each other.

If this magnet should only stick to metal, the direction of magnetization / polarity is irrelevant.

Note: If too much force is applied, neodymium magnets can break. We recommend a maximum tightening torque of 2 Nm when screwing on this magnet.

Technical specifications

total diameter D	42,0 mm
inner ring d1	4,5 mm
total height H	4,0 mm
material	Neodym
temperature max.	80 ° C
quality of magnetisation	N35
tolerance	+/- 0,1 mm
direction of magnetisation	axial (parallel zur Höhe)
coating	Nickel (Ni-Cu-Ni)
magnetic force	12,00 kg
weight	0,035 kg

The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EG - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
No subject to registration under the REACH Regulation.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.