Ringmagnet Ø 50.0 x 4,5 x 4.0 mm N35 nickel with counterbore north

Preview: Ringmagnet Ø 50.0 x 4,5 x 4.0 mm N35 nickel with counterbore north

Quantity	Price / pcs
To 2 pcs	€5.70 *
from 3 pcs	€5.02 *
from 10 pcs	€4.39 *
from 20 pcs	€4.08 *
from 40 pcs	€3.82 *
from 180 pcs	request a quote!

The prices are VAT included plus extra charges for shipping

Ready for shipment, delivery in 2-4 days

1 pieces: € *

Item number: RMS-50x04x04-N-NP
EAN: 4250538423086
Manufacturer: magnets4you
Available on stock: 222 pieces

This ring magnet Ø 50 mm made of neodymium with a 90 ° countersink can be screwed on with a... more

Close menu

Product information

This ring magnet Ø 50 mm made of neodymium with a 90 ° countersink can be screwed on with a countersunk screw.
The 4.5 mm hole is designed for a screw with a diameter of 4 mm.

This magnet has the north pole on the depression side.
Note: You cannot use two of these magnets in pairs, i.e. the magnets do not stick to one another with the countersunk side, but repel each other.
If this magnet should only stick to metal, the direction of magnetization / polarity is irrelevant.

Note: If too much force is applied, neodymium magnets can break. We recommend a maximum tightening torque of 2 Nm when screwing on this magnet.

Technical specifications

total diameter D	50,0 mm
material	Neodym
temperature max.	80 ° C
quality of magnetisation	N35
tolerance	0.1 mm
inner ring d1	4,5 mm
direction of magnetisation	axial
coating	Nickel (Ni-Cu-Ni)
magnetic force	14,000 kg
total height H	4,0 mm
weight	0,059 kg

The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EG - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
No subject to registration under the REACH Regulation.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.