Blockmagnet 60.0 x 15.0 x 5.0 mm N45 nickel with countersunk hole
Quantity | Unit price |
---|---|
To 2 pieces |
€6.15*
|
From 3 pieces |
€5.35*
|
From 10 pieces |
€4.61*
|
From 20 pieces |
€4.37*
|
From 40 pieces |
€4.12*
|
From 160 pieces | Request price! |
Available, delivery time: 1-3 working days
Product information "Blockmagnet 60.0 x 15.0 x 5.0 mm N45 nickel with countersunk hole"
You can use several types of screw, such as slotted screw with countersunk head for wood, machine screw, countersunk screw with Torx or hexagon socket. The top diameter for the screw head is: 6.94 mm.
The North Pole is on the side with the depression. For this reason, using two of these magnets in pairs is not possible (repulsion).
So that the neodymium magnets do not break or splinter, simply sink the magnets into the workpiece and protect the raw magnet from direct hits. Our round neodymium pot magnet with hole and countersunk are protected from impact by a steel pot.
Technical specifications
Adhesive force: | 11 kg |
---|---|
Coating: | Nickel (Ni-Cu-Ni) |
Height H: | 5 mm |
Lenght: | 60 mm |
Magnetization direction: | axial (parallel to height) |
Magnetization quality: | N45 |
Material: | Neodymium |
Maximum temperature: | 80 °C |
Tolerance: | +/- 0,1 mm |
Weight: | 33 g |
Width: | 15 mm |
Technical specifications for magnetization grade N45
Material | Remanence | Coercivity | Energy product | Maximum temperature | |||||
---|---|---|---|---|---|---|---|---|---|
Br | bHc | iHc | (BxH)max | ||||||
Gauss (G) | Tesla (T) typ. | kOe | kA/m | kOe | kA/m | MGOe | kJ/m 3 | ||
N45 | 13200-13700 | 1.32-1.37 | 10.8-12.5 | 860-995 | ≥ 12 | ≥ 955 | 43-45 | 342-358 | ≤ 80 |
The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
Login
15 August 2016 11:29
gute Qualität!
26 August 2016 08:52
sehr übersichtliche Website
23 December 2017 08:57
Verwende die Magnete als Halterung für LED Panels unter meiner Rigipsdecke. Einfach zu montieren und sehr gute Magentkraft.
20 February 2018 11:06
Produkt entspricht voll den Erwartungen
18 July 2018 21:21
sehr gutes Produkt
18 July 2018 21:21
sehr gutes Produkt
21 September 2018 08:03
sehr gute Qualität des Produktes
1 October 2019 08:44
zum Basteln
24 October 2019 16:39
Verwende den Magneten als Zuhaltung und Sicherung von Terrassentüren.
16 January 2020 08:53
Guter kräftiger Magnet. Ich benutze ihn zur Zuhaltung eines Hasenstall Türchens. Die üblichen Möbelschnäpper waren zu schwach.