Ringmagnet Ø 9.5 x 6.5 x 2.0 mm N42SH nickel - 150 ° C
| Quantity | Unit price |
|---|---|
| From 5 pieces |
€0.81*
|
| From 15 pieces |
€0.69*
|
| From 40 pieces |
€0.65*
|
| From 80 pieces |
€0.58*
|
| From 750 pieces | Request price! |
Available, delivery time: 1-3 working days
Product information "Ringmagnet Ø 9.5 x 6.5 x 2.0 mm N42SH nickel - 150 ° C"
Technical specifications
| Adhesive force: | 750 g |
|---|---|
| Coating: | Nickel (Ni-Cu-Ni) |
| Diameter: | 9,5 mm |
| Height H: | 2 mm |
| Inner diameter: | 6,5 mm |
| Magnetization direction: | axial (parallel to height) |
| Magnetization quality: | N42SH |
| Material: | Neodymium |
| Maximum temperature: | 150 °C |
| Tolerance: | +/- 0,1 mm |
| Volume: | 75 mm³ |
| Weight: | 0,57 g |
Technical specifications for magnetization grade N42SH
| Material | Remanence | Coercivity | Energy product | Maximum temperature | |||||
|---|---|---|---|---|---|---|---|---|---|
| Br | bHc | iHc | (BxH)max | ||||||
| Gauss (G) | Tesla (T) typ. | kOe | kA/m | kOe | kA/m | MGOe | kJ/m 3 | ||
| N42SH | 12900-13200 | 1.29-1.32 | 10.8-12.0 | 860-955 | ≥ 20 | ≥ 1592 | 40-42 | 318-334 | ≤ 150 |
The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
Login
3 October 2015 15:48
Top Ware
6 October 2015 19:08
Alles ok
22 July 2016 11:20
Dampfbasteleien
26 October 2016 17:02
Die Magnete werden zur Fixierung der Druckplatte eines 3D-Druckers verwendet.
18 May 2018 09:25
*****
25 October 2019 09:25
entspricht genau dem was bestellt wurde.
25 October 2019 09:25
entspricht genau dem was bestellt wurde.