Thousands of products in stock
Neodymium flat bar 65 x 13 x 5 mm with hole and countersink - 20 kg
-
Daily shipping and fast delivery
-
No minimum order value
-
Personal advice
With a length of 65 mm and height 5 mm you get a small magnet system with an adhesive force of approx. 20 kg.
The nickel-plated U-profile protects the strong NdFeB magnet from damage and increases / bundles the adhesive force on one side.
This means that this flat bar magnet is only magnetic on the open side with the countersunk holes!
On the back, the magnet is therefore non-magnetic and has no adhesive force.
The neodymium flat strip only rests with the two U-legs on the metallic adhesive base and thus prevents damage to the glued-in magnet.
With the existing hole with countersink, you can securely attach this holding magnet with an M3 countersunk screw.
Due to the elongated shape, these magnets can also be easily sunk into grooves.
The safer and robust fastening option for industry, workshops, mechanical engineering, trade fair construction and hobby rooms.
Technical specifications
| Lenght: | 65 mm |
|---|---|
| Width: | 13,5 mm |
| Height H: | 5 mm |
| Adhesive force: | 20 kg |
| Material: | Neodymium |
| Magnetization quality: | N35 |
| Maximum temperature: | 80 °C |
| Coating: | Nickel (Ni-Cu-Ni) |
| Bore diameter: | 3,4 mm |
| Bore diameter: | 7,6 mm |
| Weight: | 30 g |
Technical specifications for magnetization grade N35
| Material | Remanence | Coercivity | Energy product | Maximum temperature | |||||
|---|---|---|---|---|---|---|---|---|---|
| Br | bHc | iHc | (BxH)max | ||||||
| Gauss (G) | Tesla (T) typ. | kOe | kA/m | kOe | kA/m | MGOe | kJ/m 3 | ||
| N35 | 11700-12100 | 1.17-1.21 | 10.8-11.5 | 860-915 | ≥ 12 | ≥ 955 | 33-35 | 263-279 | ≤ 80 |
The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.
Accessories
| From 5 pieces |
€0.75*
|
|---|---|
| From 15 pieces |
€0.67*
|
| From 40 pieces |
€0.61*
|
| From 80 pieces |
€0.56*
|
| From 1500 pieces | Request price! |