Skip to main content
Thousands of products in stock
No minimum order value
No surcharge for small quantities
Daily shipping
Flexible payment options

Ringmagnet Ø 10.0 x 3.4 x 3.0 mm N42 nickel with counterbore south

Product information "Ringmagnet Ø 10.0 x 3.4 x 3.0 mm N42 nickel with counterbore south"

Our smallest ring magnet with a 90 ° countersink that you can attach with a screw.
The 3.4 mm bore is designed for a screw with a diameter of 3 mm.
 
The south pole of this magnet is on the depression side.
 
Note: You cannot use two of these magnets in pairs, i.e. the magnets do not stick to one another with the countersink side, but repel each other.
To use this magnet type in pairs, you need the following magnet as a counter magnet: Ringmagnet Ø 10.0 x 3.4 x 3.0 mm N42 nickel with counterbore north.
If this magnet should only stick to metal, the direction of magnetization / polarity is irrelevant.
 
Note: If too much force is applied, neodymium magnets can break. We recommend a maximum tightening torque of 2 Nm when screwing on this magnet.

Technical specifications

Adhesive force: 900 g
Coating: Nickel (Ni-Cu-Ni)
Diameter: 10 mm
Height H: 3 mm
Lower diameter: 6,94 mm
Magnetization direction: axial (parallel to height)
Magnetization quality: N42
Material: Neodymium
Maximum temperature: 80 °C
Superior diameter: 3,4 mm
Tolerance: +/- 0,1 mm
Weight: 1,7 g

Technical specifications for magnetization grade N42

Material Remanence Coercivity Energy product Maximum temperature
  Br bHc iHc (BxH)max  
  Gauss (G) Tesla (T) typ. kOe kA/m kOe kA/m MGOe kJ/m 3  
N42 12900-13200 1.29-1.32 10.8-12.0 860-955 ≥  12 ≥ 955 40-42 318-334 ≤  80

The product conforms to the European RoHS Community legislation

The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.

Safety Notice

NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!

Determination of the magnetic force

The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.

10 of 26 reviews

Average rating of 4.9 out of 5 stars


92%

8%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


27 March 2019 20:32

Review with rating of 5 out of 5 stars

Sehr gute Qualität

28 October 2015 14:08

Review with rating of 5 out of 5 stars

super

18 January 2018 10:21

Review with rating of 5 out of 5 stars

schnelle Lieferung

20 April 2018 09:28

Review with rating of 5 out of 5 stars

Für Fliegengitter-Türen optimal

23 April 2018 07:16

Review with rating of 5 out of 5 stars

Wir haben uns um unseren Balkon einen durchsichtigen Vorhang gegen Regen

16 August 2018 06:35

Review with rating of 5 out of 5 stars

Alles wie in der Beschreibung angegeben. Super.

22 January 2019 21:12

Review with rating of 5 out of 5 stars

★★★★★

7 July 2019 23:13

Review with rating of 5 out of 5 stars

sehr gutes Produkt

23 September 2019 23:07

Review with rating of 5 out of 5 stars

Starker Magnet mit zuverlässiger Befestigungsmöglichkeit

3 September 2019 08:47

Review with rating of 5 out of 5 stars

Dei Magnete werden verwendet

Accessories

Average rating of 5 out of 5 stars

Ringmagnet Ø 10.0 x 3.4 x 3.0 mm N42 nickel with counterbore north
Item number: RMS-10x3x03-N-NP
On Stock: 1499 pieces

Item currently not available

Quantity Unit price
From 5 pieces
€0.75*
From 15 pieces
€0.64*
From 40 pieces
€0.60*
From 160 pieces
€0.53*
From 750 pieces Request price!
Pieces

Average rating of 4.8 out of 5 stars

100 metal discs / metal plates Ø 10 mm with adhesive dots
Item number: MS-10
On Stock: 156 PU

Item currently not available

Quantity Unit price
To 2 PU
€21.80*
From 3 PU
€19.62*
From 10 PU
€18.53*
From 20 PU
€17.44*
From 40 PU
€16.35*
From 300 PU Request price!
Pieces