Skip to main content
Thousands of products in stock
No minimum order value
No surcharge for small quantities
Daily shipping
Flexible payment options

Ringmagnet Ø 20.0 x 4.5 x 4.0 mm N42 nickel with counterbore north

Product information "Ringmagnet Ø 20.0 x 4.5 x 4.0 mm N42 nickel with counterbore north"

This ring magnet with a 90 ° counterbore made of neodymium can be screwed on securely with a countersunk screw. The 4.5 mm hole is designed for a screw with a diameter of 4 mm.
 
This magnet has the north pole on the depression side.
 
Note: You cannot use two of these magnets in pairs, i.e. the magnets do not stick to one another with the countersunk side, but repel each other.
To use this type of magnet in pairs, you need the following magnet as a counter magnet:
 
If this magnet should only stick to metal, the direction of magnetization / polarity is irrelevant.
 
Note: If too much force is applied, neodymium magnets can break. We recommend a maximum tightening torque of 2 Nm when screwing on this magnet.

Technical specifications

Adhesive force: 5 kg
Coating: Nickel (Ni-Cu-Ni)
Diameter: 20 mm
Height H: 4 mm
Lower diameter: 9,1 mm
Magnetization direction: axial (parallel to height)
Magnetization quality: N42
Material: Neodymium
Maximum temperature: 80 °C
Superior diameter: 4,5 mm
Tolerance: +/- 0,1 mm
Weight: 9,5 g

Technical specifications for magnetization grade N42

Material Remanence Coercivity Energy product Maximum temperature
  Br bHc iHc (BxH)max  
  Gauss (G) Tesla (T) typ. kOe kA/m kOe kA/m MGOe kJ/m 3  
N42 12900-13200 1.29-1.32 10.8-12.0 860-955 ≥  12 ≥ 955 40-42 318-334 ≤  80

The product conforms to the European RoHS Community legislation

The product conforms to the European RoHS Community legislation (2002/95/EC - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.

Safety Notice

NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!

Determination of the magnetic force

The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.

10 of 47 reviews

Average rating of 4.9 out of 5 stars


91%

9%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


9 October 2018 11:39

Review with rating of 5 out of 5 stars

Fixierung einer Knsole

9 May 2019 06:52

Review with rating of 5 out of 5 stars

Dieser Magnet gehört zum Lieferumfang eines Artikels von meinem Kunden. Qualität ist wie gewünscht.

6 May 2019 08:40

Review with rating of 5 out of 5 stars

Super

26 March 2019 18:10

Review with rating of 5 out of 5 stars

Man kriegt die dinger echt kaum auseinander. Richtig stark!

15 December 2018 14:24

Review with rating of 5 out of 5 stars

Jederzeit gerne wieder.

25 October 2018 22:27

Review with rating of 5 out of 5 stars

Die Dinger sind klasse

20 June 2018 17:18

Review with rating of 5 out of 5 stars

sehr schnelle Lieferung

8 October 2015 10:02

Review with rating of 5 out of 5 stars

Hält gut:)

21 May 2018 10:21

Review with rating of 5 out of 5 stars

Ich habe mit den Produkten meine Überwachungskameras im Außenbereich befestigt - wind- und wetterresistent

30 July 2019 09:19

Review with rating of 5 out of 5 stars

Alles gut

Accessories

Average rating of 5 out of 5 stars

Metal disc Ø 20 mm with hole and countersink nickel
Item number: MS-20-N
On Stock: 35572 pieces

Item currently not available

Quantity Unit price
From 10 pieces
€0.30*
From 40 pieces
€0.26*
From 80 pieces
€0.23*
From 160 pieces
€0.22*
From 1800 pieces Request price!
Pieces

Average rating of 4.9 out of 5 stars

Metal disc Ø 20 galvanized with double-sided adhesive tape
Item number: MS-20-DK
On Stock: 2956 pieces

Item currently not available

Quantity Unit price
From 5 pieces
€0.49*
From 15 pieces
€0.45*
From 40 pieces
€0.42*
From 80 pieces
€0.39*
From 1000 pieces Request price!
Pieces

Average rating of 4.9 out of 5 stars

Ringmagnet Ø 20.0 x 4.5 x 4.0 mm N42 nickel with counterbore south
Item number: RMS-20x4.5x04-N
On Stock: 4668 pieces

Item currently not available

Quantity Unit price
From 3 pieces
€2.34*
From 10 pieces
€2.19*
From 20 pieces
€1.97*
From 40 pieces
€1.84*
From 500 pieces Request price!
Pieces

Average rating of 5 out of 5 stars

Metal disc Ø 20 with double-sided adhesive tape, white
Item number: MS-20-W-DK
On Stock: 1670 pieces

Item currently not available

Quantity Unit price
From 5 pieces
€0.55*
From 15 pieces
€0.51*
From 40 pieces
€0.47*
From 80 pieces
€0.44*
From 1000 pieces Request price!
Pieces